借助知识库这一工具,您可以找到常见问题的答案。在下面浏览所有知识库文章。
借助知识库这一工具,您可以找到常见问题的答案。在下面浏览所有知识库文章。
Switching from a hardware profile that contains an ExionLC (or Shimadzu LC) system to a hardware profile with an Eksigent LC when both LCs are connected to the PC can cause Analyst® 1.6.3 software to crash, resulting in communications issues.
12/02/2022
ExionLC 100
|
ExionLC AC
|
ExionLC AD
|
Analyst Software
|
Unable To Change Sample Loop Volume With Analyst® Hardware Configuration For ExionLC™ AD System After replacing the sample loop for a different volume on an ExionLC™ AD system, the volume of the loop can be changed on the LC controller panel but not within Analyst® software hardware configuration.
09/14/2022
ExionLC AD
|
Analyst Software
|
Part Number for the Tubing from the Exion/Shimadzu Autosampler to the Column Oven? The tubing connecting the Exion/Shimadzu autosampler to the column oven is stainless steel with connectors and is coated with flexible plastic (600 mm x 0.1 mm). This part can be obtained can be obtained directly from Shimadzu (PN 228-53184-91) or from the online SCIEX store.
10/23/2017
ExionLC AC
|
ExionLC AD
|
Troubleshooting retention time shifts and variable pump pressure Instructions for performing flow tests on Shimadzu Nexera and EXION AD HPLC pumps and troubleshooting common causes of inadequate pump flow.
03/20/2017
ExionLC AD
|